600mA Negative LDO+ Offers Rail-To-Rail Operation, Programmable Current Limit & Output Current Monitor

Linear-Technology-logoLinear Technology Corporation announces the LT3090, the newest member of our LDO+™ family, a 600mA low dropout negative linear regulator featuring low noise, rail-to-rail operation, precision programmable current limit and a bidirectional output current monitor. The device is cable-drop compensation capable, easily parallelable for higher current or PCB heat spreading and configurable as a floating 3-terminal regulator. The LT3090’s input voltage range is -1.5V to -36V. A single resistor programs the adjustable rail-to-rail output voltage from 0V to -32V and dropout voltage is only 300mV (typical at full load). The device features a trimmed, ±1% accurate 50µA current source reference and provides ±2% output voltage tolerance over line, load and temperature. Output voltage regulation, bandwidth, transient response and output noise (18µVrms over a 10Hz to 100kHz bandwidth) remain independent of output voltage due to the device’s unity-gain voltage follower architecture. The LT3090 is ideal for negative logic supplies, low noise instrumentation and RF supplies, rugged industrial supplies and for post-regulating switching supplies.

The LT3090 exhibits excellent stability with a wide range of output capacitors including small, low cost ceramic capacitors. It is stable with a minimum 4.7µF output capacitor. A single resistor adjusts the precision programmable current limit. The device’s bipolar current monitor either sources or sinks a current proportional to output current, useful for system monitoring. The LT3090’s bidirectional shutdown capability allows the device to operate with either positive or negative logic levels. In addition, the LT3090’s accurate shutdown thresholds enable a programmable UVLO threshold for either the regulator’s input supply or a positive system supply voltage. Internal protection circuitry for the IC includes a precision current limit with foldback and thermal shutdown with hysteresis. In bipolar supply applications where the regulator’s load returns to a positive supply, the OUT pin can be pulled above GND up to 40V and will still allow the LT3090 to safely start up.

The LT3090 is available in a low profile (0.75mm) 3mm x 3mm 10-lead DFN and a 12-lead MSOP package, both with backside thermal pads. E- and I-grade operating junction temperature is -40°C to +125°C, H-grade is -40°C to +150°C, and the MP-grade is specified over the widest operating range from -55°C to +150°C. 1000-piece pricing for the E-grade version starts at $2.15 each, and devices are available from stock. For more information, visit www.linear.com/product/LT3090.

Summary of Features: LT3090

Output Current: 600mA

Single Resistor Sets Output Voltage

50µ SET Pin Current: ±1% Initial Accuracy

Programmable “Brick-Wall” Current Limit

Dual Polarity Output Current Monitor

Parallelable for Higher Current and Heat Spreading

Low Dropout Voltage: 300mV

Low Output Noise: 18µVRMS (10Hz to 100kHz)

Configurable as a 3-Terminal Floating Regulator

Wide Input Voltage Range: –1.5V to –36V

Rail-to-Rail Output Voltage Range: 0V to –32V

Positive/Negative Shutdown Logic or UVLO

Internal Back-Up Current Limit with Foldback

Stable with 4.7µF Minimum Output Capacitor

Stable with Ceramic or Tantalum Capacitors

Reverse Output Protection

Thermally Enhanced 12-Lead MSOP and 10-Lead 3mm × 3mm x 0.75mm DFN Packages

Filed in: News

Related Posts

Bookmark and Promote!

© 2017 ItVoice | Online IT Magazine India. All rights reserved.
Powered by IT Voice